MiniScan-15PS Autocorrelator

MiniScan-15PS models is our most cost efficient units. The basic model is for 50fs-15PS and 700-1200nm. The 30PS option is upgraded to 50fs-30PS. The short option can extend to as short as 10fs. The MiniScan-15PS is available with two-photo sensor for wavelength tuning free or SHG crystal detection. The MiniScan-15PS is suitable for laser repetition size <10Hz to 1GHz, for both Oscillator and Amplifier lasers. It has the wavelength range 400-3400nm depending on the options. The very high sensitivity (10-6 W2) and the high dynamical range (>108) is suitable for most lasers. The very compact size 16x7x6 (in cm) makes it portable and suitable to tight space application.

MiniScan-15P  Specification:  Best Price                            
Pulse Width Range
Basic model: 50fs-15PS
Pulse width Option
(1) 30PS option; (2)20fs option; (3) 10fs option
Standalone Unit
These are standalone unit can be monitored by an oscilloscope. Two BNC cable are required.
Wavelength Range(1)
Basic model: 700-1200nm
Wavelength option
(1)1200-2100nm; (2) 400-700nm; (3)2000-3400nm. Easy to switch each other
Delay Time Resolution
<0.1fs
Delay linearity
<0.001
Sensitivity(2)
10-6 W2, as low as <1mW average power
Laser Repetition
<10 Hz to 1GHz
Max. Input Power
200 mW or 5 μJ (whichever results in lower value)
Measurement Mode
Collinear intensity
Two-Photo Sensor
No Phase Matching tuning for different wavelength
Trigger Mode
Internal trigger, no need for external trigger
Input Polarization
Linear horizontal and vertical
Input Aperture
6 mm (free-space)
Input Beam Coupling
Free-space; Input Optional: fiber coupling FC/PC or other type
Dynamical Range
>108 adjustable
Power supply
100-220V 50-60Hz 24V DC output
Digit Scope option
USB Digit scope option needed for computer operation
software
Digit scope software Including Real-time display of pulse width, data average, auto fitting routines to Gaussian, Lorentz, Squared Sech shape

(1)For tuning free two-photo sensor model, the SHG crystal model is available with similar specifications.

(2)Measured sensitivity defined as average power times peak power of the incident pulses PAV * Ppeak

Options

▪ USB digit scope option for computer operation
▪ Wavelength option
▪ Pulse width option
▪ Fiber coupling
▪ Input polarization wave plate
▪ X-Y mount option for easy alignment